Downloading Netex-G Library

Artwork has developed a library version of the NETEX-G program for use by OEM partners. This enables the partner to integrate NETEX-G functionality into their own applications - typically for importing Gerber and ODB++ data into the application.

Requesting Password and License Strings

Prior to downloading you should contact Artwork and request the following information:

  • ftp server login and password

  • Library installation password

  • Arrange for an OEM license module

  • include your full contact info.



netexg_lib64_vs2015.win64.v113a.exe   09/19/2017 53 MByte
netexg_lib_sk_kit64.win64.v105.exe   09/19/2017 OEM Softkey Kit v1.05
gbrvu.win32.v347.exe   03/22/2017 v3.47 35 MByte


netexg_lib64.linux.v113.tar   09/19/2017 41 MByte.

Problems Accessing our FTP Site?

Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.

If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.

Getting Your Machine's ID


291KB zipped. 710KB after uncompressing. Unzip this to v8_lmtools.exe. Run this on your computer; click on the SYSTEM tab and copy both your machine's ethernet address and also the disk serial number. For some laptops, locking the software to the Disk serial number is preferable to the ethernet address.

Installation Video

A short video showing how to download, install and license NETEX-G and GBRVU.



Contents   Table of Contents
Introduction   Describes NETEX-G's basic functionality
Collecting Input Data  

Describes the required data files and how to check they are ready for using in NETEX-G.

User Interface   Goes through all of NETEX-G's dialog boxes and settings.
Drill2Gbr Manual   Describes how to run the Drill to Gerber conversion.


Library Revision History

Example Files


417 Ingalls St. Unit C, Santa Cruz, CA 95060 831.426.6163 email: