Download WaferMap Convert
To download the WaferMap Convert V2 program use the link below. Then send us an email requesting an installation password and key codes. (Please include your full company details and the reason you wish to evaluate the program -- otherwise we will not issue evaluation codes.)
If you already own a license you need only get the installation password. You can continue to use your existing license.
I would like to evaluate your WaferMap Convert program for Windows.
I ran the v8_lmtools.exe utility and got the following Ethernet address:
I plan to use the program to convert my map files from our test machine to our pick and place machine.
I've supplied a sample of the map file so that you can test to see if my map file format is supported.
International Harvesting and IC Design
10087 Champion Way Bldg 43
Topeka Kansas 09323
Tel (450) 132-2213
Fax (450) 132-2113
In order for us to generate license strings you need to provide us your machine's ID. This is best done by downloading the lmtools.zip utility and running it on your machine. Use the System Settings tab and copy the Ethernet Address that it displays. See below:
Files to Download
v2.10 12/12/2018 29 MB
Problems Accessing our FTP Site
Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.
If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to:
- Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.
- It is also possible that your corporate firewall blocks ftp downloads, especially .exe files. If that is the case, please contact your IT department and ask them to download the software for you.
417 Ingalls St. Unit C, Santa Cruz, CA 95060 831.426.6163 email: email@example.com