Downloading Reticle Shot Map Layout Generator

Requesting Password and License Strings

Prior to downloading you should contact Artwork and request the following information:

• ftp server login and password

• program installation password

• program license strings

• include your full contact info.

In order for us to generate license strings you need to provide us your machine's ID. This is best done by downloading the FlexLM_Tools utility and running it on your machine. Use the System Settings tab and copy the Ethernet Address and Disk Volume Serial Number that it displays. See below:

Also please tell us whether your input is Gerber/Drill or ODB++ and which output format you need: GDSII, ASCII, DXF, EGS, ANF. The same program supports all these options but license generation is different.

Example Email

Dear Steve,

I would like to evaluate your Reticle Shot Map layout generator program.Please send me  
the FTP login, the install password and temporary key strings for my 
machine.

I got my ethernet physical address by using the lmtools
utility provided above.

ethernet address = 00560abE72
disk serial number = 07ab45c5

Reason for Evaluation
---------------------
I intend to use the program to convert shot maps provided by my foundry into a RDL mask.

Thanks much,

John Boy  
International Harvesting and IC Design
10087 Champion Way Bldg 43
Topeka Kansas 09323
Tel (450) 132-2213  Fax (450) 132-2113

Downloads

Problems Accessing our FTP Site?

Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.

If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.