Download WaferMap Convert

To download the WaferMap Convert program click on the link below. Then send us an email requesting an installation password and key codes. (Please include your full company details and the reason you wish to evalute the program -- otherwise we will not issue evaluation codes.)

If you already own a license you need only get the installation password. You can continue to use your existing license.

Dear Artwork

I would like to evaluate your WaferMap Convert program for Windows.


I ran the lmtools_pkg.exe utility and got the following
ethernet address:

000a56ab3800

I plan to use the program to convert my map files from our
test machine to our pick and place machine. 

I've supplied a sample of the map file so that you can test
to see if my map file format is supported.


Thanks much,

John Boy  
International Harvesting and IC Design
10087 Champion Way Bldg 43
Topeka Kansas 09323
Tel (450) 132-2213
Fax (450) 132-2113
john_boy@toolshed.ihicd.com

In order for us to generate license strings you need to provide us your machine's ID. This is best done by downloading the FlexLM_Tools utility and running it on your machine. Use the System Settings tab and copy the Ethernet Address that it displays. See below:

Files to Download

Version 2

Problems Accessing our FTP Site

Artwork's FTP site requires a login and password to gain access. This information will be provided to you with the license strings.

If after clicking on the link you get a This Page Cannot be Displayed error, this may be due to Internet Explorer's problems accessing password protected FTP servers. In that case, please review the possible fixes on our support page.

It is also possible that your corporate firewall blocks ftp downloads, especially .exe files. If that is the case, please contact your IT department and ask them to download the software for you.